Technical Support - Mechanical - Miscellaneous
Return to Technical Support

Cleaning and off-season care instructions

Fuel Injector:
While opening and closing the throttle, blow air through the metering block to clear fuel from lines. Squirt some lite oil into the metering block. Once a year apply a drop of oil along the throttle shaft rub areas to keep it moving freely. Store the fuel injector in plastic.

Fuel Pump:
Squirt some lite oil into the pump and turn it over until it runs out the other side. Store in plastic.

Nozzles:
Clean nozzles by soaking them in solvent or gas and blowing them out with air. Nozzles can be checked for flow using a leak tester.

Fuel Cell:
Check the vent assembly and keep it clear of any blockage. Your tank must be properly vented when using fuel injection.