Back to Hilborn Home Page
Our Products: FORD

Model No. *427F8B/EL
Part Name FE Ford Electronic Fuel Injector
Application Ford FE applications with low rise or medium rise heads only. Uses a Blue Thunder Weber intake (or supplied by you). Available in straight or angle cut.
Engine FE Ford big blocks; 390, 427, 428
Bore Size 2-3/16", 2-3/8"

The Ford FE, another in a long list of engines in the Ford arsenal from the 60ís. A potent engine recently embraced as a marquee engine for its uniqueness and power production, can also have the most unique and powerful induction system available, a Hilborn injector. Just like many years ago when an FE in your car meant you were serious about power, a Hilborn injector can take it to the next level with awesome throttle response, low end torque, and top end power to burn. But if cruising is your style, then a Hilborn injector or EFI Kit is also the way to go. See for yourself why a Hilborn is the perfect choice.

Ford FE injectors are based on a Blue Thunder Weber style intake. Hilborn can supply either the straight or angle cut design or you can supply your own.

Why is a Hilborn better?
Hilborn Injector manifolds are a true individual runner (IR) manifold providing the best all around power output and drivability in comparison to other IR manifolds manufactured with a plenum chamber. A true IR does not suffer from the disruptive cylinder to cylinder pulses associated with a common plenum intake or IR manifolds with a plenum chamber. These pulses promote fuel separation from the air carrier, the slowing of air movement in the manifold, and the inability to realize engine potential due to poor burn characteristics in the combustion chamber. The IR design of the Hilborn isolates these pulses allowing the engine to make more bottom end torque, have increased throttle response and most importantly allow the engine to accelerate faster. Most applications will also see a significant increase in top end power. These same attributes also allow smoother low speed drivability.

Besides, nothing looks better than eight stacks sitting on top of your engine. Have the best of both worlds with a Hilborn!
Proudly made in the USA!

    Standard Features:
  • high quality heat-treated aluminum casting
  • cad-plated steel ram tubes
  • fully assembled with shafts, butterflies, linkage, fuel rails, mounted TPS with connector and vacuum kit

  • polished castings
  • powder coating
  • chrome ram tubes
  • port matching
  • complete hand porting

  • Pricing:
  • Hilborn EFI kit with FAST XFI ECU starting at $7695.00
  • Hilborn EFI kit with Holley HP ECU starting at $6790.00
  • Blue Thunder manifold, angled cut $771.00

Click here for a complete description of Hilborn EFI Kits

Contact our EFI specialist for more information or a price quote.


Related Products
Part Number Part Name
*RTA Ram Tube Adapters
WPA600A Weldon 600-A Flow Thru Fuel Pump
WR2040 Weldon 2040 Relief Valve Regulator
*F1200 In Line Fuel Filter
IH-275 or IH-325 Tube Top Air Filter/Full Bell
IH-B Bootie Air Filter/D-style Bell
*F549131 Y Block
STESK, STEBKM Synchrometer

All Content ©2000, HILBORN Fuel Injectors, All Rights Reserved | Sales Policy | Site design by portallogic